LED Explosion-proof Floodlight BLD150
Scope Of Application:
1. Suitable for explosive gas environment zone 1 and zone 2.
2. Suitable for IIA, IIB, IIC explosive gas environment.
3. Suitable for environments with temperature group T1 ~ T6.
4. Suitable for energy-saving renovation projects and difficult maintenance and replacement sites.
5. Widely applicable to large-area flood / projection lighting places such as petroleum, petrochemical, chemical companies, etc.
6. Using gas station awnings, various types of plant areas flood light, plant road lighting.
Normal Working Conditions:
1. The altitude of the installation site does not exceed 2000m.
2. The ambient ambient temperature is -40 ℃ ~ + 40 ℃, and the average temperature value within 24h does not exceed + 35 ℃.
3. The relative humidity of the surrounding air is not more than 95% (+ 25 ° C).
4. In a place without severe vibration, shock and swing.
5. Suitable for Zone 1, Zone 2, IIA, IIB, IIC and T1 ~ T6 group explosive gas environment or flammable dust place.
Technical Parameters:
Type |
I |
II |
III |
IV |
Executive standard |
GB3836 (equivalent to IEC60079, EN series standards) / GB12476 (equivalent to IEC61241, EN series standards) |
|||
Explosion-proof mark |
Exd emb IIC T4/6 Gb/Ex tD A21 IP66 T135℃ |
|||
Rated voltage |
85-265VAC |
|||
Frequency range |
50Hz |
|||
Rated power |
50W-100W |
120W-200W |
240W-300W |
350W-400W |
LED luminous flux |
6500-13000lm |
15600-26000lm |
31000-37000lm |
42000-52000lm |
Power factor |
≥0.95 |
|||
Power efficiency |
≥0.88 |
|||
Color rendering index |
≥80 |
|||
Surge current |
Cold start/Cold; 30A (max) 230VAC |
|||
Safety regulations |
UL8750, TUV EN61347-1, EN61347-2-13 |
|||
EMC standard |
EN61000-3-2, TUV EN61347-1, EN61347-2-13 |
|||
IP Grade |
IP66 |
|||
Anticorrosion grade |
WF2 |
|||
Inlet thread |
G3/4” |
|||
Cable specification |
Φ7-Φ12 mm |
|||
Installation mode |
Ceiling type, wall type, embedded type, bracket type, street lamp type |
|||
Working environment |
Temperature: -40~45℃ Humidity: 10%~90% |
|||
Working life |
≥50000H |
|||
Weight |
9.5kg |
14.5kg |
18kg |
29kg |
Feature Of Product:
Optical System Features:
1. Imported chips are preferred, with excellent lumen maintenance and high luminous efficiency.
2. Adopt surface mount technology (SMT), greatly improve thermal conductivity.
3. Using the latest technology nanotechnology, 16.67% higher light intensity than coated engineering plastics
Drive System Features:
1. Use constant current drive with short circuit. Over-voltage protection function.
2. Can be integrated emergency function, easy to install and simple. The emergency power reduction function can be activated, which saves energy during emergencies in an unmanned environment and improves the fire safety function.
3. Excellent compatibility, will not cause interference to other electrical appliances, can make voltage tolerance fluctuate 25%.
4. The drive adopts the glue sealing process to ensure that the components are dissipated and not subject to corrosion.
Structural Features Of The Whole Lamp:
1. Standard heat dissipation structure, wiring cavity, power supply cavity, and light source cavity are all independently cooled without affecting each other.
2. The exposed fasteners and accessories are made of 304 stainless steel, which has better corrosion resistance.
3. Integrated emergency, no need for additional power distribution box, explosion-proof installation and maintenance.
4. Installation method can choose ceiling type, boom type, bracket type.
http://www.zjrhfb.com/